Icom IC-706 Instruction Manual page 45

EM TONE Fmony)
right).
is RH TIO (CW only)
This item adjusts the CW key ratio (or weight). The
ratio can be selected from 2.8 to 4.5.
E Initial set mode items
A beep sounds each time a switch is pushed to con-
firm it. This function can be turned OFF for silent
operation.
i (band beep)
A beep sounds when an operating frequency enters
or exits an amateur band. This functions indepen-
| dent of the confirmation beep setting (above).
(auto power OFF)
The auto power OFF function can be used to auto-
matically turn the transceiver OFF after a specified
time of operation. This item can be set to 20 min., 40
min., 60 min., or OFF.
"rnt
Confirmation beep O
(defauit)
r
Band beep ON
(default)
yer
Auto power OFF
deactivates. (default)
SETMODE 7
Unit: Hz
The default is "n," normal.
The default is 20 wpm.
The default is 3.0.
N Confirmation beep OFF
rar
Band beep OFF
zi
of
Auto power OFF set to
20 min.
42