Icom IC-706 Instruction Manual page 44

41
/ SETMODE
E Quick set mode items
The default is 5.
This item adjusts microphone
gain from 1 to 10 for
Note that while adjusting mic gain, the
F LIME (RTTY only)
This item adjusts the VOX (Voice-activated Transmit)
delay time. The delay time can be adjusted from O to
2 sec. in 0.1 sec. units.
The default is 1.0 seconds.
This item adjusts break-in delay time for CW semi
break-in operation. The delay time is. selectable from
O to 2 sec. in 0.1 sec. units.
The default is 1.0 seconds.
Ye EP T (RTTY only)
This item adjusts the carrier frequency (BFO frequen-
cy), allowing you to change the audio characteristics.
Selectable values are —200 to +200 Hz in 10 Hz steps.
The default is O Hz.
i Normal : key open=mark
reverse keying can be selected.
Reverse : key open=space