Icom IC-706 Instruction Manual page 26

23
———————— ———— R E E E E E
4 RECEIVE AND TRANSMIT
E Functions for transmit
e Setting output power
© Push [DISP] for 2 sec. to select quick set mode.
UN | 'selected.
*Carrier power
e Setting microphone gain
Microphone gain must be adjusted properly so that
your signal does not distort when transmitted.
© Select SSB or another phone mode.
Microphone gain is
(2 Push [DISP] for 2 sec. to select quick set mode.
set to 6.
© Push [MENU] one or more times to select G2 MIC
GHIMN.
€ While speaking into the microphone adjust the mic
© Meter function
(QD Select fi.
*Push [DISP] 1 or 2 times when 5 or (3 appears.
e Push [MENU] one or more times to select H3.
@ Push [(F-3)'IEE T] one or more times to select the
desired meter function.
*The display indication changes as in the table at right.
Indicates the relative RF output power.
Indicates the SWR over the transmis-
sion line.