Icom IC-706 Instruction Manual page 28

25
[TUNER/CALL]
NOTE:
7 *The AT-180 cannot be used for the 144 MHz
7 band. |
Lights to indicate the AT-180
is turned ON.
CONVENIENT
*When the tuner is OFF, the [TUNER] light goes out.
* Tuner sensitive condition (HF bands only)
«For the 50 MHz band:
If you require critical tuning at any time during trans-
Push and hold [TUNER] to tune the antenna. If the
mission, select the tuner sensitive condition. See
[TUNER] light flashes slowly while transmitting, push p. 51 for selection.
and hold [TUNER] again to re-tune the antenna.
* Automatic tuner start (HF bands only)
[TUNER/CALL]
If you require to turn OFF the tuner under conditions