Command access PD29 Installation Instructions

PD27/28/29/30 INSTALLATION INSTRUCTIONS
SVR DEVICE
2. SIZE DEVICE
 Standard lengths are for 36" or 48" door.
Device must be cut for other lengths.
 Mark length with tape – length equals
desired door size subtracted from device
size (for 30" door = cut 6" off 36" device)
ensuring a square cut.
1. PREPARE DOOR
 Prepare door, frame and floor or
 Refer to trim template if installing trim.
36" Device
48" Device
3. INSTALL DEVICE
 Install device and trim with chassis/case
 Device can be surface mounted to the
 VF devices must be through bolted on
Reinforced Steel
Surface Mount: Drill/Tap push side for 1/4-20
or Aluminum Door
Solid Wood Door Drill 1/8" Pilot Hole for #10 Wood Screw
All Others Use optional Sex Bolts. Drill push side with
9/32" drill bit. Drill pull side with 3/8" drill bit.
1
888-622-2377 | commandaccess.com
threshold according to template.
Maximum cut off length:
Panic Fire Alarm MLR
6" 8"
12" 14"
screws (2 or 4 screws depending on
device and trim type).
door, optional sex nuts are available,
device is through bolted if using trim.
wood or composite doors.
Mounting Options:
2" 3"
8" 9"
20684_A (639401 Rev1)