Unlock Scanner; Connect Scanner - Microtek ScanMaker 9830XL Start Here Manual

3.

Unlock Scanner

1. Remove the yellow "Unlock" sticker from your
scanner.
2. Look for the unlocking screw at the bottom of
the scanner.
3. Using a screwdriver, push and turn the locking
screw counterclockwise to the unlock position.
When successfully unlocked, the screw will
push out a little, protruding slightly from the
bottom of the scanner.
NOTE: To lock the scanner (for shipping and other
reasons), please refer to the scanner's user manual
available on the Microtek website.
4.

Connect Scanner

To the Power Adapter
1. Connect the power adapter to the back of the scanner.
2. Plug one end of the power cord into the power adapter, and plug the other end of the power
cord into a wall outlet or other
power source.
To the USB 3.0 Cable
3. Connect one end of the USB
cable to your computer.
4. Connect the other end of the
USB cable to the scanner's
USB port.
5. Turn on the scanner by
switching the Power switch
to the "I" position, and wait
for the green LED light to stop
blinking and stay on steady.
The system will detect your
scanner automatically.
Now the scanner is ready for
use.
1
5
2
2
Unlocked
3
4