Unlock Scanner; Connect Scanner - Microtek Bio-5050 Start Here Manual

3.

Unlock Scanner

A. Remove the yellow "Unlock" sticker from your
digitizer.
B. With the scanner power off, tilt the front right
corner of the scanner to see the locking screw at the
bottom.
C. Using a screwdriver, push and turn the locking screw
counterclockwise to the unlock position. When
successfully unlocked, the screw will push out a
little, protruding slightly from the bottom of the
scanner.
NOTE: To lock the scanner (for shipping and other reasons), please refer
to the Bio-5050 User's Manual in the Microtek Software DVD.
4.

Connect Scanner

To the Power Adapter
A. Connect the power adapter to the back of the scanner.
B. Plug one end of the power cord into the power adapter, and plug the other end of the power
cord into a wall outlet or other power source..
To the Hi-Speed USB Cable
C. Connect one end of the USB cable
to your computer.
D. Connect the other end of the USB
cable to the scanner's USB port.
E. Press the Power button (
the front panel of the scanner, and
wait for the lights to stop blinking
and stay on steady.
The system will detect your
scanner automatically.
Power button
) at
E
2
D
A
B
C