Unlock Scanner; Connect Scanner; To The Power Adapter - Microtek Bio-5000 Start Here Manual

Unlock Scanner

A. Remove the yellow "Unlock" sticker from your digitizer.
B. With the scanner power off, tilt the front right corner of
the scanner to see the locking screw at the bottom.
C. Using a screwdriver, push and turn the locking screw
counterclockwise to the unlock position. When
successfully unlocked, the screw will push out a little,
protruding slightly from the bottom of the scanner.
NOTE: To lock the scanner (for shipping and other reasons),
refer to the Bio-5000 Supplement.

Connect Scanner

To the power adapter

A. Connect the power cord to the back of the
scanner.
B. Plug the power cord into a power source.
To the Hi-Speed USB cable
C. Connect one end of the cable to your computer.
D. Connect the other end of the cable to the scanner.
E. Press the power button at the front panel of your scanner,
and wait for the lights to stop blinking and stay on steady.
Power button
The system will detect your
scanner automatically.
2
B
A
C
D