Danfoss EKE 1A User Manual page 6

Superheat controller and stepper valve driver, Type EKE 1A, 1B, 1C, 1D
Table 2: Accessories and Related products
MMIGRS2 Display
User interface module MMIGRS2 Display.
Table 3: Accessories and Related products
Pressure Transducer
AKS Pressure Transmitter,available with ratiometric and 4 - 20 mA. NSK Ratiomet-
ric Pressure Probe. XSK Pressure probe 4 - 20 mA.
Table 4: Accessories and Related products
Stepper motor valves
EKE is compatible with Danfoss stepper motor valves i.e Danfoss ETS 6, ETS 8M
(Bipolar) / ETS / ETS Colibri® / ETS L, KVS / KVS Colibri® and CCM / CCMT / CCMT L /
CTR valves.
© Danfoss | Climate Solutions | 2024.08
ACCCBI Cable
ACCCBI cables for MMI display and gateway.
PT 1000 AKS is a High precision temp. sensor AKS 11 (preferred), AKS 12, AKS 21
ACCPBT PT1000 NTC sensors EKS 221 (NTC-10 Kohm) ACCPBT NTC Temp probe (IP
67 / 68)
Various lengths of standard M12 cable are available for connecting stepper motor
valves.
MMIMYK Gateway
MMIMYK device is used as a gateway to connect EKEs
and the KoolProg PC software for parameter setting
or data logging.
Temperature Sensor
M12 Angle Cables
BC398828796060en-000103 | 6