Advertisement
Chapter 4: BIOS Setup
Save & Exit
Save Changes and Reset
To save the changes and reset, select this field then press <Enter>. A dialog
box will appear. Confirm by selecting Yes. You can also press <F4> to save
and exit Setup.
Discard Changes and Reset
To exit the Setup utility and reset without saving the changes, select this
field then press <Enter>. You may be prompted to confirm again before
exiting. You can also press <ESC> to exit without saving the changes.
Restore Defaults
To restore the BIOS to default settings, select this field then press <Enter>. A
dialog box will appear. Confirm by selecing Yes.
Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved.
Boot Override
To bypass the boot sequence from the Boot Option List and boot from a
particular device, select the desired device and press <Enter>.
UEFI: Built-in EFI Shell From Filesystem Device
To launch EFI shell from a filesystem device, select this field and press
<Enter>.
49
DNA 141 User Manual
Advertisement
Need help?
Do you have a question about the DNA 141 and is the answer not in the manual?
Questions and answers