Advertisement
Chapter 4: BIOS Setup
PTT Configuration
This section is used to configure the PTT state features.
TPM Device Selection
Select a TPM device: PTT or dTPM. Selecting PTT enables PTT in SkuMgr.
Selecting dTPM 1.2 disables PTT in SkuMgr.
Warning: PTT or dTPM will be disabled and all data saved on it will be....
Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved.
FIPS Configuration
This section is used to configure the FIPS mode.
FIPS Mode Select
Enable or disable configuraing the FIPS mode.
35
DNA 141 User Manual
Advertisement
Need help?
Do you have a question about the DNA 141 and is the answer not in the manual?