Figure 77 Configuration > Nat > Sua Server - Zywall; Table 48 Configuration > Nat > Sua Server - Zywall - ZyXEL Communications Vantage CNM User Manual

Figure 77 Configuration > NAT > SUA Server - ZyWALL
The following table describes the labels in this screen.
Table 48 Configuration > NAT > SUA Server - ZyWALL
LABEL
Index
Active
Name
Default Server
Incoming Port(s)
Chapter 9 Configuration > NAT
DESCRIPTION
This is the number of an individual SUA server entry. You may select a rule to edit or
delete it.
Select this check box to enable the SUA server entry. Clear this checkbox to
disallow forwarding of these ports to an inside server without having to delete the
entry.
Type a name to identify this port-forwarding rule. To delete a SUA server entry,
erase the name and click Apply.
In addition to the servers for specified services, NAT supports a default server. A
default server receives packets from ports that are not specified in this screen. If you
do not assign a default server IP address, then all packets received for ports not
specified in this screen or remote management will be discarded.
Enter a port number here. To forward only one port, enter it again in the second
field. To specify a range of ports, enter the last port to be forwarded in the second
field.
Vantage CNM User's Guide
152