Vantage CNM User's Guide
Figure 65 Configuration > NAT > SUA Server – ZyWALL
The following table describes the labels in this screen.
Table 44 Configuration > NAT > SUA Server
LABEL
Index
Active
Name
Default Server
Start Port
End Port
Server IP
Address
Apply
Cancel
139
DESCRIPTION
This is the number of an individual SUA server entry. You may select a rule to edit or
delete it.
Select this check box to enable the SUA server entry. Clear this checkbox to
disallow forwarding of these ports to an inside server without having to delete the
entry.
Type a name to identify this port-forwarding rule. To delete a SUA server entry,
erase the name and click Apply.
In addition to the servers for specified services, NAT supports a default server. A
default server receives packets from ports that are not specified in this screen. If you
do not assign a default server IP address, then all packets received for ports not
specified in this screen or remote management will be discarded.
Type the start and end port numbers that define the service that will be forwarded to
the inside server specified in the next field.
Type the IP address of the inside server.
Click Apply to save your changes back to the ZyXEL device.
Click Cancel to return to the previous screen.
Chapter 9 Configuration > NAT