EUROCOM Nightsky RX415z User Manual page 72

Quick Start Guide
1
To Configure Displays using Project
1. Attach your display to the
appropriate port, and turn it
on.
2. Press the
F7) key combination.
3. Click on any one of the
options from the menu to
select PC
Duplicate,
Second screen only.
4. Press the
combination, or, go to the
Display settings menu and
select Connect
wireless display and then
click Connect.
1 - 40 Video Features
+ P (or Fn +
screen only,
Extend or
+ K key
to a
Figure 1 - 31 - Project (Devices)

Configuring External Displays
When multiple external display are at-
tached it is recommended that you
use the System (in Settings - page
9) control panel or the + P (or Fn
-
+ F7 - page 8) key combination, to
B -
configure the external displays.
External displays can also be config-
ured by using the Intel Graphics
Command Center (page
B -
trol panel.
Further video configuration options
are available in the NVIDIA (page
32) control panel.
B
27) con-
B -