EUROCOM Nightsky RX415z User Manual page 248

Video Driver Controls
Figure B - 6
Settings . System >
Display
(Connect to a
Wireless Display)
B
B - 14 Wireless Display Configuration
Wireless Display Configuration
1. Note that no driver or application is required for wireless display in Windows 11.
2. Press the + K key combination, or, go to the Display settings menu and select
Connect to a wireless display and then click Connect.
3. The system will then search for compatible display devices (this may take up to
60 seconds so allow time for this to complete).
4. Double-click any detected display device in the list.
5. You may then need to input a pin number for the device to which you are
connecting and click Next.