EUROCOM Nightsky RX415z User Manual page 37

System Startup
1. Remove all packing materials, and place the computer on a stable surface.
2. Securely attach any peripherals you want to use with the notebook (e.g. keyboard and mouse) to their ports.
3. When first setting up the computer use the following procedure (as to safeguard the computer during
shipping, the battery will be locked to not power the system until first connected to the AC/DC adapter and
initially set up as below):
• Attach the AC/DC adapter cord to the DC-In jack at the rear of the computer, then plug the AC power cord into an outlet, and connect
the AC power cord to the AC/DC adapter and the battery will now be unlocked.
4. Keep the AC/DC adapter connected to the computer to fully charge the battery to 100% capacity (the battery LED
indicator will turn green).
5. Use one hand to raise the lid/LCD to a comfortable viewing angle (do not exceed 130 degrees); use the other
hand to support the base of the computer (Note: Never lift the computer by the lid/LCD).
6. Press the power button on the computer to turn it on.
Figure 1 - 1 - Computer with AC/DC Adapter
Plugged-In & LCD/Lid Open
130°
System Startup 1 - 5
Quick Start Guide
1