Setup Utility - Exit Menu
Click Exit Saving Changes (or press F10) to save all changes made and exit the BI-
OS. Choosing Exit Discarding Changes will wipe out any changes you have made
to the Setup and exit the BIOS. You can also choose to Load Optimal Defaults (or
press F9) to return the BIOS to its original state, and erase any previous changes you
have made in a previous session. Select Discard Changes to cancel any changes
made in the current session.
BIOS Utilities
Battery Storage
Setting
You can enable Shipping
Mode for your battery if the
system is battery powered
and the battery level is re-
duced.
In this mode the battery
will be locked to not power
the system until first con-
nected
to
adapter and initially set up
as below:
Attach the AC/DC adapter
cord to the DC-In jack at
the rear of the computer,
then plug the AC power
cord into an outlet, and
connect the AC power
cord to the AC/DC adapter
and the battery will now be
unlocked.
Figure 5 - 14
Exit Menu
Setup Utility - Exit Menu 5 - 23
5
the
AC/DC
Need help?
Do you have a question about the Nightsky RX415z and is the answer not in the manual?