EUROCOM Nightsky RX415z User Manual page 262

Video Driver Controls

4K2K Videos on 4K2K
External Displays
Note you may experi-
ence some video lag
when playing 4K2K vid-
eos on an attached
4K2K external display.
Configuring
External Displays
When multiple exter-
nal display are at-
tached it
recommended
you use the System (in
B
Settings) control panel
or the + P (or Fn +
F7) key combination,
to configure the exter-
nal displays.
Table B - 1
Display Modes
B - 28 Display Devices & Options
Display Devices & Options
Note that you can use the Intel Graphics Command Center to configure external
displays connected to the HDMI port and DisplayPort 1.4 over USB 3.2 Gen
(Type C) port. See your display device manual to see which formats are supported.
Display Mode
Single Display
Clone / Duplicate
Extended / Extend
is
that
When you first attach an external display you may find that the desktop does not oc-
cupy the full screen area. Use either the display's auto adjust/configure controls, or
the Intel Graphics Command Center to configure the full screen display.
Description
One of the connected displays is used as the display device (PC
screen only or Second screen only).
Both connected displays output the same view and may be
configured independently
Both connected displays are treated as separate devices, and
act as a virtual desktop

Attaching Displays