EUROCOM Nightsky RX415z User Manual page 214

Modules & Options

Clearing TPM
Information
You can click Clear TPM,
which will toggle the set-
ting between Enabled/
Disabled. If set to Ena-
bled this will clear exist-
6
ing TPM information in
order to reset the TPM.
Figure 6 - 38
Security - Trusted
Computing
6 - 54 Trusted Platform Module
Enabling & Activating TPM
1. Restart the computer.
2. Enter the BIOS pressing F2 during the POST/startup.
3. Click to enter the Setup Utility and select the Security menu.
4. Click TPM Configuration and select Enabled for Clear TPM.
5. You will then need to save the changes and restart the computer.