Download Print this page

EUROCOM Nightsky RX415z User Manual page 165

Advertisement

3.
Copy the Drivers folder from the location below (D: denotes your DVD drive) on
the Device Drivers & Utilities + User's Manual disc to the USB flash drive or
external USB hard disk.
• D:\Options\RAID\F6\Drivers
4.
Start up your notebook computer and press <F2> to enter the BIOS and go to the
Setup Utility.
5.
Select the Advanced menu.
6.
Select Enable VMD controller (see page
7.
Press <F10> to "Save and Exit" and select <Yes> .
8.
As the computer restarts press <F2> to enter the BIOS again and go to the Setup
Utility.
9.
Select the Advanced menu.
10. Go to Intel(R) Rapid Storage Technology (Advanced menu) and select "Create
RAID Volume".
17), and select "Enabled".
5 -
Modules & Options
Figure 6 - 1
Create RAID Volume
RAID Mode Setup 6 - 5
6

Advertisement

loading
Need help?

Need help?

Do you have a question about the Nightsky RX415z and is the answer not in the manual?

This manual is also suitable for:

Raptor x16