EUROCOM Nightsky RX415z User Manual page 169

20. Press <F10> to "Save and Exit" and select <Yes>, however note the bulleted
points below.
• Make sure the Windows OS DVD is in the attached DVD drive or on a USB
flash drive, as the computer starts up it will automatically boot from the Win-
dows 10 OS DVD (you will be prompted to press a key to boot from the DVD/
USB flash drive).
• Make sure your USB Flash drive, or external USB hard disk, containing the
Drivers folder (D:\Options\RAID\F6\Drivers) previously copied from the
Device Drivers & Utilities + User's Manual disc is attached to one of the com-
puter's USB ports.
21. Press <F2> as the computer starts up to select the drive containing the Windows
OS DVD/USB flash drive as the boot device in Boot Manager.
22. Press a key at system startup to begin installing Windows from your Microsoft
Windows drive.
23. Click Next > Install Now to continue installing the operating system as normal
(see your Windows documentation if you need help on installing the Windows
OS).
24. If no installation drives appear "Where do you want to Install Windows?"
window, click Load Driver from the menu at the bottom.
25. Click Browse and browse to the location you copied the files to on your USB Flash
drive or external USB hard disk (X: denotes your USB Flash drive or external USB
hard disk):
• X:Drivers
Modules & Options
RAID Mode Setup 6 - 9
6