Saving A Pattern You Create - Roland MC-909 Quick Start Manual

Saving a pattern you create

Pattern data you create will be lost if you re-select the pattern or turn off the power.
Here's how to save your data if you want to keep it.
1.
Press [PATTERN] to enter Pattern mode.
2.
Press [WRITE].
The Write Menu screen will appear.
Make sure that "Pattern" is highlighted.
fig.Q3-01
3.
Press [F1 (PTN)] or [ENTER].
The pattern name entry screen will appear.
fig.Q3-02
4.
Assign a name to the pattern you created.
[CURSOR (left/right)]
[CURSOR up/down]
[VALUE] [INC/DEC]
[F1 (Change Type)]
[F2 (Delete)]
[F3 (Insert)]
* If you decide to cancel while entering the name, press [F5 (Cancel)].
28
Moves the cursor (the location at which to enter/edit
a character).
Switches letters between uppercase and lowercase.
Selects characters.
Selects the type of character.
Each time you press this, you will alternately select
the first character of the uppercase alphabet (A),
lowercase alphabet (a), or numerals and symbols (0).
Deletes the character at the cursor location, while
shifting the following characters to the left, closing
the gap.
Inserts a space at the cursor location.