Using A New Sd Card - Roland MC-101 Owner's Manual

3.
To execute, press the
If you decide to cancel, press the
* Factory reset does not restore the contents of the SD card to
their factory-set state. For more about the data that was on the
SD card when shipped from the factory, refer to the following
URL.
&
https://www.roland.com/support/
* If you want to back up the contents of the SD card included with
the MC-101 to your computer, use your computer to save the
contents on other media.
[VALUE] dial.
[EXIT] button.

Using a New SD Card

If you're using a new SD card, you must first format it on
the MC-101.
1 2
1.
Remove the screws of the SD card protector (rear
panel).
The SD card protector is fastened with screws. To
remove the card protector, use a Philips screwdriver
to remove the screws.
Making Various Settings
3
4 5 6
17