Table of Contents
Advertisement
Utility
From the Top Menu window, choose "4. Utility" to access the UTILITY MENU screen.
Here you can save user data to USB memory, or restore data from USB memory back
into the JUNO-STAGE.
Backing Up User Data (User Backup)
You can save user data to USB memory. This operation is called "User
Backup."
For the user backup procedure, refer to "Saving Data to USB Memory
(User Backup)" (p. 144).
Restoring Backed-Up Data (User Restore)
User data that was backed-up to USB memory can be restored back
into the JUNO-STAGE. This operation is called "User Restore."
For the user restore procedure, refer to "Restoring Saved Data from
USB Memory Back into the JUNO-STAGE (User Restore)" (p. 144).
Returning to the Factory Settings
(Factory Reset)
You can return all of the JUNO-STAGE's settings to the state they were
in when the instrument was shipped from the factory. This operation is
called "Factory Reset."
If the JUNO-STAGE's internal memory contains important data
that you've created, be aware that all of this user data will be lost
when you execute the factory reset operation. If you want to keep
this data, save it to USB memory before you continue.
1.
In the UTILITY MENU screen, use the cursor buttons to select
"Factory Reset," and press [ENTER].
A confirmation message will appear.
2.
To execute the factory reset, [7 (EXEC)].
If you decide to cancel, press [6 (CANCEL)].
When the factory reset has been completed, the following screen
will appear.
fig.disp-.eps
3.
Turn the power of the JUNO-STAGE off, then on again.
Chapter 11. Other Settings
Initializing USB Memory (USB Memory Format)
You can initialize (format) USB memory. This operation is called "USB
Memory Format."
If the USB memory contains important data that you've created,
be aware that all of this data will be lost when you execute this
operation.
1.
In the UTILITY MENU screen, use the cursor buttons to select "USB
Memory Format," and press [ENTER].
A confirmation message will appear.
2.
To exit the format operation, press [7 (EXEC)].
If you decide to cancel, press [6 (CANCEL)].
155
Advertisement
Table of Contents
