Roland Juno-Stage User Manual page 188

Effects List
ENHANCER → FLANGER
73:
fig.MFX-73
L in
Enhancer
Mix
R in Enhancer
Mix
Parameter Value
Enhancer Sens # 0–127
Enhancer Mix #
0–127
Flanger Pre Delay 0.0–100 msec
0.05–10.00 Hz,
Flanger Rate #
note
Flanger Depth 0–127
Flanger
-98–+98%
Feedback #
D100:0W–
Flanger Balance #
D0:100W
Level 0–127
ENHANCER → DELAY
74:
fig.MFX-74
L in
Enhancer
Mix
R in Enhancer
Mix
Parameter Value
Enhancer Sens # 0–127
Enhancer Mix # 0–127
Delay Time 0–2600 msec, note
Delay
-98–+98%
Feedback #
200–8000 Hz,
Delay HF Damp
BYPASS
Delay Balance # D100:0W–D0:100W
Level 0–127
188
Balance D
L out
Feedback
Balance W
Flanger
Balance W
R out
Balance D
Explanation
Sensitivity of the enhancer
Level of the overtones generated
by the enhancer
Adjusts the delay time from when
the direct sound begins until the
flanger sound is heard.
Frequency of modulation
Depth of modulation
Adjusts the proportion of the
flanger sound that is fed back into
the effect. Negative (-) settings will
invert the phase.
Adjusts the volume balance between
the sound that is sent through the
flanger (W) and the sound that is not
sent through the flanger (D).
Output Level
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Explanation
Sensitivity of the enhancer
Level of the overtones generated
by the enhancer
Adjusts the delay time from the
direct sound until the delay
sound is heard.
Adjusts the proportion of the
delay sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Adjusts the frequency above
which sound fed back to the
effect will be cut. If you do not
want to cut the high frequencies,
set this parameter to BYPASS.
Adjusts the volume balance
between the sound that is sent
through the delay (W) and the
sound that is not sent through the
delay (D).
Output Level
CHORUS → DELAY
75:
fig.MFX-75
Balance D
L in
Balance W
Chorus
Balance W
R in
Balance D
Parameter Value
Chorus Pre
0.0–100 msec
Delay
Chorus Rate #
0.05–10.00 Hz, note
Chorus Depth 0–127
Chorus
D100:0W–D0:100W
Balance #
Delay Time
0–2600 msec, note
Delay
-98–+98%
Feedback #
200–8000 Hz,
Delay HF Damp
BYPASS
Delay
D100:0W–D0:100W
Balance #
Level
0–127
FLANGER → DELAY
76:
fig.MFX-76
Balance D
L in
Feedback
Balance W
Flanger
Balance W
R in
Balance D
Parameter Value
Flanger Pre Delay 0.0–100 msec
Flanger Rate # 0.05–10.00 Hz, note
Flanger Depth 0–127
Flanger
-98–+98%
Feedback #
Flanger Balance # D100:0W–D0:100W
Delay Time
0–2600 msec, note
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Explanation
Adjusts the delay time from the
direct sound until the chorus sound
is heard.
Frequency of modulation
Depth of modulation
Volume balance between the
direct sound (D) and the chorus
sound (W)
Adjusts the delay time from the
direct sound until the delay sound
is heard.
Adjusts the proportion of the delay
sound that is fed back into the
effect. Negative (-) settings will
invert the phase.
Adjusts the frequency above which
sound fed back to the effect will be
cut. If you do not want to cut the
high frequencies, set this
parameter to BYPASS.
Adjusts the volume balance
between the sound that is sent
through the delay (W) and the
sound that is not sent through the
delay (D).
Output Level
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Explanation
Adjusts the delay time from when
the direct sound begins until the
flanger sound is heard.
Frequency of modulation
Depth of modulation
Adjusts the proportion of the
flanger sound that is fed back into
the effect. Negative (-) settings will
invert the phase.
Volume balance between the
direct sound (D) and the flanger
sound (W)
Adjusts the delay time from the
direct sound until the delay sound
is heard.