Roland Juno-Stage User Manual page 109

Parameter Value
Random Pan Depth 0–63
Alter Pan Depth L63–0–63R
TVA ENVELOPE
Parameter Value
A-Env T1 V-Sens
-63–+63
A-Env T4 V-Sens -63–+63
A-Env Time KF
-100–+100
(Time Keyfollow)
A-Env Time 1–4 ★
0–127
Time 1–4
ZOOM
A-Env Level 1–3
0–127
ZOOM Level 1–3
TVA Envelope
T1 T2 T3
Level
L1 L2
Note on
Explanation
Use this parameter when you want the stereo location to change randomly each time you press a key.
Higher settings will produce a greater amount of change.
This setting causes panning to be alternated between left and right each time a key is pressed.
Higher settings will produce a greater amount of change. "L" or "R" settings will reverse the order in
which the pan will alternate between left and right. For example if two tones are set to "L" and "R"
respectively, the panning of the two tones will alternate each time they are played.
Explanation
This allows keyboard dynamics to affect the T1 of the TVA envelope.
If you want Time 1 to be speeded up for strongly played notes, set this parameter to a positive (+)
value. If you want it to be slowed down, set this to a negative (-) value.
Use this parameter when you want key release speed to affect the T4 value of the TVA envelope.
If you want T4 to be speeded up for quickly released notes, set this parameter to a positive (+) value.
If you want it to be slowed down, set this to a negative (-) value.
Use this setting if you want the TVA envelope times (T2–T4) to be affected by the keyboard location.
Based on the TVA envelope times for the C4 key (center C), positive (+) settings will cause notes higher
than C4 to have increasingly shorter times, and negative (-) settings will cause them to have
increasingly longer times. Larger settings will produce greater change.
TVA envelope times (T1–T4)
Higher settings will lengthen the time until the next volume level is reached.
TVA envelope levels (L1–L3)
Specify how the volume will change at each point, relative to the Tone Level value.
T4
Time
L3
Note off
Chapter 8. Detailed Editing for Patches
Parameters indicated by (
ZOOM
Parameter marked with a "★" can be controlled using specified MIDI messages.
Time Keyfollow
Time
C1 C2 C3
) can be edited via ZOOM EDIT (p. 94).
(Matrix Control, p. 110)
-100
-50
0
+50
+100
C4 C5 C6 C7
Key
109