Adjusting The Volume (Tva/Tva Envelope) - Roland Juno-Stage User Manual

Chapter 9. Detailed Settings for a Rhythm Set

Adjusting the Volume (TVA/TVA Envelope)

TVA PARAMETER
Parameter Value
Tone Level 0–127
Level V-Curve FIX, 1–7
Level V-Sens -63–+63
Tone Pan L64–0–63R
Random Pan Depth 0–63
Alternate Pan Depth
L63–0–63R
TVA ENVELOPE
Parameter Value
A-Env T1 V-Sens
-63–+63
A-Env T4 V-Sens -63–+63
A-Env Time 1–4
0–127
ZOOM Time 1–4
A-Env Level 1–3
0–127
Level 1–3
ZOOM
TVA Envelope
T1 T2
Level
L2
L1
Note on
130
Explanation
Volume of the rhythm tone
This setting is useful primarily for adjusting the volume balance between rhythm ones.
Curve that determines how keyboard playing dynamics (velocity) will affect the volume
Set this to "FIX" if you don't want the volume of the tone to be affected by the keyboard velocity.
1
Set this when you want the volume of the tone to change depending on keyboard playing
dynamics.
Set this to a positive (+) value to have the changes in tone volume increase the more forcefully
the keys are played; to make the tone play more softly as you play harder, set this to a negative
(-) value.
Left/right position of the rhythm tone
Use this parameter when you want the stereo location to change randomly each time you press a
key.
Higher settings will produce a greater amount of change.
This setting causes panning to be alternated between left and right each time a key is pressed.
Higher settings will produce a greater amount of change. "L" or "R" settings will reverse the
order in which the pan will alternate between left and right. For example if two rhythm tones
are set to "L" and "R" respectively, the panning of the two rhythm tones will alternate each time
they are played.
Explanation
This allows keyboard dynamics to affect the T1 of the TVA envelope.
If you want Time 1 to be speeded up for strongly played notes, set this parameter to a positive
(+) value. If you want it to be slowed down, set this to a negative (-) value.
Use this parameter when you want key release speed to affect the T4 value of the TVA envelope.
If you want T4 to be speeded up for quickly released notes, set this parameter to a positive (+)
value. If you want it to be slowed down, set this to a negative (-) value.
TVA envelope times (T1–T4)
Higher settings will lengthen the time until the next volume level is reached.
TVA envelope levels (L1–L3)
Specify how the volume will change at each point, relative to the Tone Level value.
T3 T4
L3
Note off
2 3 4 5
Parameters indicated by (
Time
6 7
) can be edited via ZOOM EDIT (p. 120).
ZOOM