Selecting Sounds; Selecting Sounds (Patches); Playing Various Sounds (Category Group Buttons) - Roland Juno-Stage User Manual

QUICK START

Selecting Sounds

Selecting Sounds (Patches)

On the JUNO-STAGE, the sounds you'll be performing are called "patches."
The JUNO-STAGE contains a wide variety of patches such as "piano," "guitar," or "brass" patches. These are
called "preset patches." You are also free to create and save your own original patches ("user patches").
This section explains how to perform using the built-in preset patches.

Playing Various Sounds (Category Group Buttons)

Each preset patch is assigned to a category group such as "piano" or "guitar," and these groups correspond to
the category group buttons [RHYTHM]–[BASS]. Within each category group, the patches are further classified
into additional categories.
Here's how to use the category group buttons to select a patch.
fig.panel-patch.eps
fig.disp-patchplay.eps
Press [PATCH].
The PATCH PLAY screen will appear.
Press one of the [RHYTHM]–[BASS] buttons to select a category group.
By pressing [PIANO], [KBD/ORG], or [VOCAL/PAD] twice in succession you can select other
categories within the same category group.
Use the VALUE dial or [DEC] [INC] to select a patch.
Play the keyboard, and you'll hear the patch you selected.
28
Patch Type
Patch Group
Patch Number
Patch Category