Table of Contents
Advertisement
Chapter 2. Selecting Sounds
Selecting Patches from the Patch List
You can view a patch list and select a patch from that list.
1.
Press [PATCH].
The JUNO-STAGE will enter Patch mode, and the PATCH PLAY
screen will appear.
2.
Press one of the [RHYTHM]–[BASS] (category group) buttons to
select the desired category group.
Press [ENTER].
3.
The PATCH LIST screen will appear.
fig.disp-patchlist.eps
Patch Category
Category Group
Use [
] [
] to select the desired patch category.
4.
Select a category within the currently selected category group.
You can also use the category group buttons to select the
category group.
5.
Use the VALUE dial or [DEC] [INC] to select the desired patch
(rhythm set).
If you press [EXIT] instead of pressing [ENTER], you'll return to the
previous screen without the patch number being changed.
Selecting Patches by Number ([NUMERIC])
Here's how to select a patch by entering the desired patch number.
1.
Press [PATCH].
The JUNO-STAGE will enter Patch mode, and the PATCH PLAY
screen will appear.
2.
Use the cursor buttons to move the cursor to the patch group.
3.
Use the VALUE dial or [DEC] [INC] to select the desired patch
group.
4.
Use the cursor buttons to move the cursor to the patch type.
5.
Use the VALUE dial or [DEC] [INC] to select "Patch" or "Rhythm."
6.
Use the cursor buttons to move the cursor to the patch number.
7.
Press [NUMERIC] so it's lit.
The [0]–[9] buttons will light.
Use the [0]–[9] buttons to enter the desired patch number, and
8.
press [ENTER].
When you finalize the input, the [0]–[9] buttons will return to their
previous state of illumination.
If you press [NUMERIC] without pressing [ENTER], the [0]–[9]
buttons will return to their previous state without changing the
patch number.
46
Using a Pedal to Select Patches
(PATCH SELECT Pedal)
You can switch patches by using a pedal switch (such as the
separately available FS-5U or FS-6) connected to the PATCH SELECT
jack.
You can use a stereo cable (sold separately) to connect either two
pedal switches (sold separately) or one pedal switch (such as one
from the DP series; sold separately) to the PATCH SELECT jack.
When you press a pedal that's connected to the PATCH SELECT jack,
the patch number is incremented or decremented according to the
number of times you've pressed the pedal, and the patch will be
changed accordingly.
If you've connected only one pedal, pressing the pedal will increment
the patch number.
DP series
UP
This pedal will function according to the system setting "Patch
Select." If "Patch Select" is assigned to "AUTO UP/(DOWN),"
you'll be able to switch patches as described above. In
Performance mode, pressing the pedal will switch performances,
and if FAVORITE [ON/OFF] is on, pressing the pedal will switch
favorites. For details, refer to the system setting "Patch Select" (p.
147).
Stereo Cable
Red
White
DOWN
UP
Advertisement
Table of Contents
