Wave Mix Parameters - Roland Juno-Stage User Manual

Roland juno-stage: user guide
Table of Contents

Advertisement

WAVE MIX Parameters

WAVE MIX LV/PN
Parameter
Wave Level
Wave Pan
Wave Rnd Pan Sw
Wave Alter Pan Sw
WAVE MIX TUNE
Parameter
Wave Coarse Tune
Wave Fine Tune
VELOCITY RANGE
You can use the force with which keys are played to control the way each waveform is played.
fig.TMT-V.e
The waveform sounded
Level
when you play softly
Velo Fade Lower
Velo Range Lower
Parameter
Velocity Control
Velo Fade Lower
Velo Range Lower
Velo Range Upper
Velo Fade Upper
Value
Explanation
0–127
Volume of the waveform
L64–0–63R
Left/right position of the waveform
Use this setting to cause the waveform's panning to change randomly each time a key is pressed
(ON) or not (OFF).
OFF, ON
The range of the panning change is set by the Random Pan Depth parameter (p. 130).
This setting causes panning of the waveform to be alternated between left and right each time a
key is pressed.
OFF, ON, REVS
Set this to "ON" to pan the wave according to the Alternate Pan Depth parameter (p. 130)
settings, or to "REVS" when you want the panning reversed.
Value
Explanation
-48–+48
Pitch of the waveform's sound (in semitones, +/-4 octaves)
-50–+50
Pitch of the waveform's sound (in 1-cent steps; one cent is 1/100th of a semitone)
The waveform sounded
when you play strongly
Velo Fade Upper
Velo Range Upper
Value
Explanation
Determines whether a different waveform is played (ON) or not (OFF) depending on the force with
which the key is played (velocity).
OFF, ON, RAN
RAN: The rhythm tone's constituent waveforms will sound randomly, regardless of any Velocity
messages.
Determines what will happen to the waveform's level when the rhythm tone is played at a velocity
lower than Velo Range Lower.
0–127
If you don't want the waveform to sound at all, set this parameter to "0."
1–(UPPER)
Specifies the lowest velocity at which the waveform will sound.
(LOWER)–127
Specifies the highest velocity at which the waveform will sound.
Determines what will happen to the waveform's level when the rhythm tone is played at a velocity
greater than Velo Range Upper.
0–127
If you don't want the waveform to sound at all, set this parameter to "0."
Chapter 9. Detailed Settings for a Rhythm Set
Velocity
127

Advertisement

Table of Contents
loading

Table of Contents