Safety Warnings - ADIC DAT 160 Installation And Operating Manual

Safety Warnings

All safety and operating instructions should be read before this
product is operated, and should be retained for future reference.
This unit has been engineered and manufactured to assure your
personal safety. Improper use can result in potential electrical
shock or fire hazards. In order not to defeat the safeguards,
observe the following basic rules for its installation, use and
servicing.
1. Heed Warnings - All warnings on the product and in the operating instructions
should be adhered to.
2. Power Source - The product should be connected to a power source only of the
type directed in the operating instructions or as marked on the product.
3. Power Cord Protection - The AC line cord should be routed so that it is not
likely to be walked on or pinched by items placed upon or against it, paying
particular attention to the cord at the wall receptacle, and the point where the
cord exits from the product.
4. Power Switch - The power switch used in this product does not disconnect both
supply conductors when placed in the OFF position. To completely disconnect
power from this product, unplug the AC power cord from the receptacle on the
back of the unit.
5. Servicing - The user should not attempt to service the product beyond that
described in the operating instructions. All other servicing should be referred to
qualified service personnel.
vi
Caution