Confirm And/Or Install The Scsi Host Interface; System Software - ADIC DAT 160 Installation And Operating Manual

Note
The host computer system normally is the network server.

Confirm and/or Install the SCSI host interface

The DAT Autochanger must be connected to either an integrated SCSI host or a
SCSI interface (host adapter) card installed in the computer – either directly to the
SCSI connector on the card or as part of an existing SCSI chain. The SCSI interface
must be installed before you connect the DAT Autochanger. Refer to the instructions
supplied with the card.
Now you are ready to connect the DAT Autochanger to your host computer. Follow
the instructions provided in the next chapter.

System Software

A variety of backup and data storage software is available for use with the DAT
Autochanger. Please check with adic Sales or the Customer Assistance Center if
you have a question on the compatibility of a particular software package.
10
Getting Started