Release The Paper Chains (Cabinet Models) - Printronix P5 Quick Setup Manual

Release The Paper Chains (Cabinet Models)

Tie Wraps (2)
Figure 11. Releasing the Paper Chains
NOTE: If you have the power paper stacker installed, skip this
procedure and go to "Remove The Shipping Restraints
From The Optional Power Stacker" on page 18.
1. Open the cabinet rear door.
2. Cut the tie wraps and release the paper chains from the bags at
the top rear of the printer frame. Remove the tie wraps and
bags.
3. Make sure each chain hangs freely with no kinks or knots.
Release The Paper Chains (Cabinet Models)
Bags (2)
Paper Chains (8)
15