Audio (Output) Function Section - Panasonic AG-HPX500 Operating Instructions Manual

Audio (output) Function Section

3 4
MONITOR SELECT (audio channel) CH1/2 / CH3/4 selector switch
1
Use this switch to select the audio channel whose signals are output to the speakers, earphones or AUDIO
OUT connector.
CH1/2: Signals on Audio Channels 1 and 2 are output.
CH3/4: Signals on Audio Channels 3 and 4 are output.
The channel indications on the display window and on the audio level meter in the viewfinder are
synchronised with this selector switch.
MONITOR SELECT (audio selection) CH1/3 / ST / CH2/4 selector switch
2
In combination with the MONITOR SELECT CH1/2 / CH3/4 switch, select the audio signal output to the
speakers and earphones, and from the AUDIO OUT connector.
MONITOR SELECT (Left)
MONITOR SELECT
MONITOR/ALARM (volume) control
3
Used to control the volume of sound output from the monitor speakers and earphones.
It also adjusts the alarm sound volume.
Speakers
4
The speakers output EE sound during recording, and reproduced sound during playback. The speakers emit
an alarm sound when the warning lamp blinks and/or the indicator activates. EE sound and playback sound
are not output during alarm sound output.
When the PHONES jack is connected with earphones, sound from the speaker is automatically muted.
PHONES (earphones) jack (mini jack)
5
This connector is designed for audio monitoring (stereo) earphones. When earphones are connected, sound
from the speakers is automatically muted.
DC OUT (DC power supply) output socket
6
This output socket is designed for 12-VDC. It provides a maximum current of 1.5 A.
AUDIO OUT connector
7
• This connector outputs audio signals recorded on Channels 1/2 or 3/4.
• Output signals are selected with the MONITOR SELECT CH1/2 / CH3/4 selector switch.
18
1
2 5 6
CH1/3
ST
Audio Channels 1 and 2
CH2/4
MONITOR SELECT (Right)
CH1/2
Audio Channel 1
Stereo signals from
Audio Channel 2
7
CH3/4
Audio Channel 3
Stereo signals from
Audio Channels 3 and 4
Audio Channel 4