Panasonic AG-HPX500 Operating Instructions Manual page 80

Changing scene file settings
■Example1: Change the name of the scene
file.
1
Turn the scene file dial, then select the
scene file to be changed.
2
In the setup menus, open the SCENE
FILE screen.
3
Turn the JOG dial button to move the
cursor to the option NAME EDIT. Then,
press the JOG dial button.
For details on menu operation, refer to [Using
the menus] (page 116).
MATRIX
SKIN TONE DTL
V DETAIL FREQ
NAME EDIT
PUSH MENU TO RETURN
4
Turn the JOG dial button to move the
cursor to YES. Then, press the JOG dial
button.
MATRIX
SKIN TONE DTL
V DETAIL FREQ
NAME EDIT
PUSH MENU TO RETURN
80
Handling setup data
SCENE F1
NORM1
OFF
THIN
SCENE F1
NORM1
OFF
THIN
YES
5
When the screen shown below appears,
use the JOG dial button to enter a 6-
character file name.
• Turning the JOG dial button changes the
character display in the following order: space
(❏)→ alphabet (A to Z) → numerics (0 to 9) →
symbols (; : < = > ? @ [ \ ] ^_-./).
• If the RESET button is pressed when the
filename has been set, the characters are
cleared.
NAME EDIT
SW POSITION F2
FLU0.
PUSH MENU TO RETURN
6
After you finish setting the filename,
press the MENU button.
• This completes the NAME EDIT change. A
change that has been confirmed is retained
after a power down and is not affected by dial
position. Items set for the scene file are also
retained.