Chapter 9 Inspections Before Shooting; Maintenance And Inspections; Preparing For Inspections - Panasonic AG-HPX500 Operating Instructions Manual

9
Chapter
Inspections Before Shooting
Make sure you check that the system is operating
normally before embarking on a shoot. We
recommend using a colour video monitor to check the
image.

Preparing for Inspections

1
Mount a charged battery pack.
2
Turn the POWER switch to ON to check
the battery remaining level in the
viewfinder.
• When battery capacity is low, replace it with a
fully charged battery.
T E X T M E M O
2 3 : 5 9 : 5 9
T
9 9
Maintenance and
Inspections
13.5V
3
Insert a P2 card into the card slot and
close the slide cover.
• Confirm that the P2 card access LED for the
inserted card slot lights up in orange. If P2
cards are inserted into multiple card slots,
only the P2 card access LED for the first-
inserted (first-accessed) P2 card lights up in
orange. Then, the other P2 card access LEDs
light up in green when P2 cards are inserted.
• If the access LED for the P2 card slot in which
a P2 card is inserted keeps blinking in green,
or if there is no display, recording is not
possible on that particular P2 card.
4 3 2 1
137
Inspections Before Shooting