Setup Menu List; Scene File Screen - Panasonic AG-HPX500 Operating Instructions Manual

Setup menu list

■ Marks used in the list
: Indicates that the item can be set in the CAMERA mode.
: Indicates that the item can be set in the MCR mode.
/ : Indicates that the item can be set in both CAMERA and MCR modes.

SCENE FILE screen

Item
LOAD/SAVE/INIT
OPERATION TYPE
FRAME RATE
SYNCRO SCAN
DETAIL LEVEL
V DETAIL LEVEL
DETAIL CORING
CHROMA LEVEL
CHROMA PHASE
COLOR TEMP Ach
COLOR TEMP Bch
MASTER PED
A. IRIS LEVEL
120
Setup menu list
Description of settings (Items in bold are factory settings.)
Saves, loads and initializes scene files.
●----(No operation), LOAD (Load), SAVE (Save), INITIAL (Initialize)
Switches the shutter and frame rate operation to the video type or film type.
●VIDEO CAM: SYNCRO SCAN is set in 1/n increments. The frame rate is dependent on the REC
FORMAT. Slow shutter speeds are enabled. Time code is displayed at 30 frames
except at 24PN. (25 frames at 50 Hz)
●FILM CAM: SYNCRO SCAN is displayed as an angle. FRAME RATE can be used to vary the frame
rate. Slow shutter speeds are disabled. The time code indication is fixed at 24 hour
display. (25 frames at 50 Hz)
Selects the shooting interval and exposure time when 720P and FILM CAM TYPE is selected. The
default values for the REC FORMAT 720/60, 720/30 and 720/24 are fixed at 60P, 30P and 24P,
respectively.
●59.94Hz SYSTEM
DEFAULT, 12, 18, 20, 22, 24, 26, 30, 32, 36, 48, 60
●50Hz SYSTEM
DEFAULT, 12, 18, 20, 23, 25, 27, 30, 32, 37, 48, 50
Adjusts the synchro scan shutter speed used for shooting images on a TV screen, etc. Turn and hold
the JOG dial button (operation button) upwards or downwards to increase the speed at which the set
values change.
●When VIDEO CAM is selected as the OPERATION TYPE option setting:
• 60P/60i: 1/60.0 ... 1/249.8
• 50P/50i: 1/50.0 ... 1/248.9
• 30P/30PN: 1/30.1 ... 1/48.0 ... 1/249.8
• 25P/25PN: 1/25.0 ... 1/48.0 ... 1/248.9
• 24P/24PA/24PN: 1/24.0 ... 1/48.0 ... 1/249.8
●When FILM CAM is selected as the OPERATION TYPE option setting:
• The shutter speed is displayed as an angle such as "180.0d."
• 10.0 deg ... 180.0 deg ... 360.0 deg (the angle can be changed in increments of 0.5 degrees)
Adjusts the level of the image outline correction (in the horizontal and vertical directions).
●Adjustable range: – 7 ... 0 ... + 7
Adjusts the level of outline correction in the vertical direction.
●Adjustable range: – 7 ... 0 ... + 7
Adjusts the level of noise reduction of the detail signal.
●Adjustable range: – 7 ... 0 ... + 7
Set to – for a clearer image. Noise increases slightly. Set to + to reduce noise.
Adjusts the chroma level.
●Adjustable range: – 7 ... 0 ... + 7
Makes fine adjustments to the chroma phase.
●Adjustable range: – 7 ... 0 ... + 7
Makes fine adjustments to the color temperature (after white balance adjustment of Ach).
●Adjustable range: – 7 ... 0 ... + 7
Makes fine adjustments to the color temperature (after white balance adjustment of Bch).
●Adjustable range: – 7 ... 0 ... + 7
Adjusts the black master pedestal that serves as the video reference.
●Adjustable range: – 100 ... 0 ... + 100
Sets the desired AUTO IRIS level.
●Adjustable range: – 10 ... 0 ... + 10