P2 Cards; Inserting P2 Cards - Panasonic AG-HPX500 Operating Instructions Manual

P2 Cards

Inserting P2 Cards

<Note>
When using the camera recorder for the first time, be
sure to set the time data beforehand. On how the time
data is set, see [Setting Date and Time of Internal Clock]
(page 28).
1
Turn on the POWER switch.
2
While pressing the slide lock button,
move the slide-out door to the left.
• The door opens.
Slide-out door
30
P2 Cards
Slide lock button
3
Insert a P2 card in a P2 card slot.
• Press in the card until the eject button pops
up.
EJECT button
4
Tilt up the popped-up EJECT button.
P2 CARD ACCESS LED
• Insert a P2 card into the AG-HPX500P/E. The
P2 CARD ACCESS LED for the appropriate
slot indicates the status of the P2 card.
For how the P2 card status is indicated, see
[P2 CARD ACCESS LED and status of P2
cards] (page 32).
The card must be
inserted with the logo
right way up.