Screen Displays - Panasonic AG-HPX500 Operating Instructions Manual

Screen displays

Time code displays
1
Each time you press the COUNTER button, the
display switches over to the following data (or no
indication).
• No indication
• Counter: Counter value (only in recording
mode)
• TC: Time code value
"TC*" is displayed when the time code value
cannot be correctly read from 1394 connector
input.
The colon ( : ) between the seconds and the
frames changes to a period ( . ) in drop frame
mode.
• tc: Time code value (frame digits are indicated
in 24/30 frame conversion: 59.94 Hz FILM
CAM only)
"tc*" is indicated when the time code value
cannot be correctly read from 1394 connector
input.
The colon ( : ) between the seconds and the
frames changes to a period ( . ) in drop frame
mode.
• UB: User bit value
"UB*" is indicated when the user bit value
cannot be correctly read from 1394 connector
input.
• FR: Frame rate information for recording
• FR 60I: 60i interlace mode (60 fields/sec.)
• FR 60P: 60P progressive mode (60 frames/
sec.)
• FR 30P: 30P progressive mode (30 frames/
sec.)
68
Viewfinder Screen Status Displays
T C 1 2 : 3 4 : 5 6 : 0 0
L A C K I
P2
1394
HD1080i
60
S Q U
L O W L I G H T
8 3 % 2
ND
J U N 1 9
6 0 : 2 4 P 1/ 1 2 3 . 4
F 5 . 6
CH
1 2
3 4
9 9 9 min
U S E R - 1
P A U S E
C A C
AWB NG
ABB NG
P 3 .2 K
1 8
dB
1
ND
T E X T M E M O
2 0 0 2
2 3 : 5 9 : 5 9
S P O T
13.5V
Z 9 9
• FR 24P: 24P progressive mode (24 frames/
sec.)
• FR24PA: 24P advanced mode (24 frames/
sec.)
• FR50I: 50i interlace mode (50 fields/sec.)
• FR50P: 50P progressive mode (50 frames/
sec.)
• FR25P: 25P progressive mode (25 frames/
sec.)
In FR24P and FR24PA modes, the last digit
indicates the frame conversion sequence
information.
<Note>
When TC, tc and UB are locked to the TC IN input,
white characters over a background ( TC →
appear.
When the HOLD button is used to temporarily stop
the indication, the HOLD indication blinks.
Warnings
2
• : Flashes when no P2 card is inserted or the
P2
card is write protected.
• FULL: Blinks when there is no remaining
P2
capacity in the P2 card.
• LACK: Blinks in the loop rec mode when the
P2
remaining capacity of the P2 card is
insufficient.
• : Lights when the battery for the internal clock
is depleted.
)
TC