Normal Recording - Panasonic AG-HPX500 Operating Instructions Manual

Memory card camera recorder
Hide thumbs Also See for AG-HPX500:
Table of Contents

Advertisement

4
To use the electronic shutter, set the
shutter speed and shutter mode.
For more information, see [Setting the
Electronic Shutter] (page 53).
5
Press the REC START/STOP button to
start recording.
• During recording, the REC lamp in the
viewfinder stays illuminated.
6
To stop recording, press the REC
START/STOP button.
• The REC lamp in the viewfinder goes out.
<Note>
■Operation Buttons
In CAMERA mode, all operation buttons (REW, FF, PLAY,
STILL, STOP) are disabled.

Normal Recording

• Pressing the REC START/STOP button starts
recording of video and sound on the P2 card.
• The video and audio (including additional
information) recorded in one session is referred to as
a clip.
REC START/STOP button
<Note>
Pressing the REC START/STOP button will not
immediately stop data write operations to a P2 card
in the following situations. And the REC START/STOP
button operation is not recognized.
• When terminating a short recording
• When terminating a recording that has just continued
onto a second P2 card
36
Basic Procedures

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ag-hpx500eAg-hpx500pHpx500 - camcorder - 1080i

Table of Contents