Menu/Thumbnail Operation Section
7
6
MENU button
1
• Press and hold this button to display the setting
menu and press it again to return to the previous
image.
• This button is not available in the thumbnail
display.
<NOTE>
Use the SET button or the JOG dial button to go
between menus and select items. For details, see
section [Viewfinder and LCD menus] (page 116).
Thumbnail button
2
In MCR mode, press this button to switch
between the thumbnail screen and 1394 input
mode. Note that this switchover is not performed
during recording or playback.
Thumbnail menu button
3
In thumbnail display mode, use this button to
access thumbnail menu functions to delete clips,
for example.
<Note>
Use the CURSOR and SET buttons to select
thumbnails and access menu functions. For details,
see [Manipulating Clips with Thumbnails] (page
103).
MODE button
4
This button toggles between the CAMERA mode
and MCR mode. For details, see [Shooting and
Recording/Playback Function Section] (page 19).
CURSOR and SET buttons
5
Use these buttons to manipulate menus, the
menu bar and thumbnails.
The four triangular buttons are CURSOR buttons
and the square center button is the SET button.
24
1
2
4
3
5
PAGE/VAR button
6
Pressing this button during thumbnail display
scrolls thumbnail pages forwards and backwards
in page units.
JOG dial button
7
• Use this button to go between menu pages and
to select and set items in open setting menus
(camera menu or MCR menu).
• In a setting menu, turning the JOG dial
downwards moves the menu cursor downwards
and turning it upwards moves the menu cursor
upwards.
Press the JOG dial button to confirm made
settings.