Advertisement
Press the switch in LightSwitch eld in the Devices
menu in the Ajax app, and
the state of the switch contacts will change to the opposite; lighting will be
switched off or on. This way, system users can remotely control the lighting. For
example, switch on the light in the room in advance before entering the room.
The lighting also can be controlled in the Control
menu. To do this, go to the
Control
menu and swipe up. All control devices added to the hub will appear
in the list. Click on the switch in LightSwitch eld, and the state of the device's
contacts will change to the opposite. The lighting will switch on or off.
Advertisement
Need help?
Do you have a question about the LightSwitch Jeweller and is the answer not in the manual?
Questions and answers