Manual Control; Remote Control - AJAX LightSwitch Jeweller User Manual

Manual control

LightSwitch allows controlling lighting when a hand is 15 millimetres away from
the switch or when touching the touch-sensitive panel of the switch. Contactless
control does not limit the possibility of use, even if hands are dirty or wet. The
sensor reacts under any conditions. Therefore, the switch can be installed in
crowded places: restaurants, factories, and o ces.
LightSwitch sensor instantly reads the signal and transforms it into an electric
pulse. LightCore receives this pulse and activates a relay that switches on/off
the lighting device or another connected load, such as a cooker hood.
The entire LightSwitch panel is touch sensitive. Therefore, the lighting can be
controlled by pressing or reaching any part of the touch-sensitive panel with a
hand.

Remote control

Control via the app
LightSwitch can be used to control lighting manually and remotely through Ajax
apps .