Operation Modes - AJAX LightSwitch Jeweller User Manual

More about scenarios

Operation modes

LightSwitch can operate in one of two modes: bistable or pulse. The operating
mode is set by a user with admin or PRO rights in Ajax apps in the device
settings .
By default, LightSwitch works in bistable mode. When controlling the lighting, it
switches on or off.
When working in pulse mode, the lighting can be switched on for the required
time: from 10 seconds to 2 hours. This mode is useful, for example, if a user
needs to switch on the lighting in the corridor for 5 minutes when disarming the
security system.
Types of electrical protection of the switch
LightSwitch has two independent types of protection: current and temperature.
Current protection is activated if the load current on the switch is 2.6 A or more.
If the protection triggers, LightSwitch switches off power and sends a
noti cation to Ajax apps . At the same time, the switch itself begins to ash red
every second.
The power supply is not automatically restored when this protection is triggered.
It can be reset by clicking on the toggle in the Ajax app or on the touch panel of
the switch .
Temperature protection triggers if the temperature of the switch is greater than
+60°C. If this protection triggers, LightSwitch turns off power and sends a