AJAX LightSwitch Jeweller User Manual page 25

Lock Switch Buttons
Button name
Shutoff by Timer
Scenarios
Jeweller Signal Strength Test
User Guide
Permanent Deactivation
lighting is off.
Option for the switch button lock setup.
Activate if you want the switch not to react to
pressing. Users will be able to control the
switch in the app only.
To change the name, click on the text eld.
Option for deactivating the switch after a set
time. If this option is enabled, you need to set a
time: from 10 seconds to 2 hours.
Opens the menu for creating and con guring
automation scenarios.
Use scenarios to automate security, for routine
activities, and to improve comfort. For example,
to switch on lighting according to the schedule
or switch it off when the system is armed.
Learn more
Starts testing the Jeweller signal strength
between the switch and the hub (or range
extender).
The test allows checking the Jeweller signal
strength and the stability of the connection
between the switch and the hub (or range
extender) to select the optimal installation site.
Learn more
Opens the switch User Manual in the Ajax app.
Allows to deactivate the device without
removing it from the system. Two options are
available:
No — the device responds to commands,
executes scenarios, and transmits all
events.
Entirely — the switch does not respond to
commands in the app, does not execute
scenarios or report events, but responds to
touch.
After deactivation, LightSwitch will retain its
state at the time of deactivation: on or off.