Advertisement
LightSwitch may lose connection with the hub for the following reasons:
Power is no longer supplied.
The touch-sensitive panel has been removed (it has antennas on it, which
are necessary for communication with the hub or range extender).
The lighting device is faulty (for example, the incandescent lamp burned
out).
A device with insu cient power (up to 5 W) is connected.
LightSwitch malfunction.
If an event is received about the loss of communication with the switch, the
installer should check:
1. Power supplied on LightSwitch.
2. The presence of a touch-sensitive panel on the switch.
3. The operability of the lighting device.
If LightSwitch controls a lighting device with insu cient power (up to 5 W), it is
necessary to replace the lighting device with a similar one with a higher power or
connect a bundled capacitor in parallel with the lighting device.
Advertisement
Need help?
Do you have a question about the LightSwitch Jeweller and is the answer not in the manual?