AJAX LightSwitch Jeweller User Manual page 22

Backlight
Range extender name
Permanent Deactivation
Firmware
Device ID
Device No.
On — the button/buttons are locked. The
switch will not respond to button/buttons
touch.
Off — the button/buttons are not locked. The
switch will respond to button/buttons touch.
The status of the switch frame backlight is
displayed as follows:
On — the LED frame is backlit when the
switch is off.
Off — the LED frame is not backlit when the
switch is off.
Status of switch connection to the
signal range extender
Online — the switch is connected.
O ine — the switch is not connected.
Check the device
The eld is displayed if the switch operates via
a radio signal range extender.
Shows the status of the device Permanent
Deactivation function:
No — the device responds to commands,
executes scenarios, and transmits all
events.
Entirely — the switch will not respond to
commands, execute scenarios, or report
events, but will respond to touch.
Learn more
Switch rmware version.
Device ID/serial number. Indicated on the
device box and relay body.
Number of the switch loop (zone). With this
number, events are sent to third-party CMS of
radio
:
.