AJAX LightSwitch Jeweller User Manual page 6

Scenarios .
The device is installed without changing the electrical wiring of the object. The
device does not require a neutral wire and works only from the supply phase.
LightSwitch can be used without connecting to a hub. In this mode, it works like a regular
touch switch.
The switch can control 5 to 600 W lighting devices. The kit includes a capacitor
connected in parallel with the lighting device for low-power lamps. See the
installation section
LightSwitch frame has a LED backlight. The backlight is not bright, so it will not
disturb users even if the device is installed near a bed. If necessary, a PRO or
user with administrator rights can disable the backlight in
The product line of devices includes 1-gang, 2-gang, and 2-way light switches:
1-gang — control one lighting line (one lamp).
2-gang — control two lighting lines (two lamps).
2-way — control one light source from several seats.
If necessary, LightSwitch can also control other devices. For example, one of the
buttons can control the light, and the other one — room ventilation.
of this manual for details.
Ajax apps .