Selecting The Installation Site - AJAX LightSwitch Jeweller User Manual

The addressability of Ajax devices allows sending to PRO Desktop or to CMS not
only events but also the type of the device, its assigned name, security group,
and room. The list of transmitted parameters may vary depending on the
selected communication protocol with the CMS. The largest amount of
information is transmitted to the PRO Desktop CMS.
The switch ID and loop (zone) number can be found in their

Selecting the installation site

LightSwitch is designed to t into standard sub-sockets of the European form
factor (55). The device should be connected to the power phase cable for proper
operation. Connecting the zero power cable is not required.
Do not connect the zero power cable to LightSwtich. This can damage the device.
When installing LightSwitch, consider the Jeweller signal strength. It is
determined by the ratio of the number of undelivered or corrupted data
packages to those expected that are exchanged between the switch and the hub
or range extender over a certain period.
states in the Ajax app.