When a device identi es a fault (for example, there is no connection with the
hub), the Ajax app displays a fault counter in the device eld.
All malfunctions are shown in switch
highlighted in red.
A malfunction is displayed if:
Current protection was activated.
Temperature protection was activated.
A device with insu cient power is connected.
An insu cient power supply is detected.
There is no connection between LightSwitch and the hub (or range
extender).
What to do in case of connection loss with the device
states
. Fields with malfunctions will be
Need help?
Do you have a question about the LightSwitch Jeweller and is the answer not in the manual?